Stainless steel syrup machine used in liquid syrup manufacturing plant

Precautions for the use of corn processing equipment

For the use of corn processing equipment, our company will summarize the understanding of corn processing equipment over the years and summarize the use of corn processing equipment.

Corn processing equipment

1, when choosing corn processing equipment must be carefully check the quality of the equipment, good quality of corn processing equipment, can reduce the occurrence of failure during use, through the reasonable application of corn processing equipment, can improve the production efficiency, and reliable operation, stable process, each system, each link, ensure enterprise production benefit.

2. Install corn processing equipment. As the saying goes, well begun is half done.The installation of corn processing equipment should be in accordance with the plan and the foundation map, check whether the installation of the foundation size is in line with the requirements of the drawings, if there is any discrepancy, should be repaired, until the size is correct, before installation.In addition, in order to avoid the corn processing equipment in the transport process caused by deformation, damage or loss, so in the installation, to check and accept the equipment list, and take corresponding measures, and then install.

3. There are certain requirements for corn raw materials when using corn processing equipment.Generally speaking, the less impurity the more suitable for processing of corn, in addition, in the collection of corn raw materials, it is inevitable that there will be broken phenomenon.At this time to maintain the appropriate particle content, help the next better processing.

The above are some problems that should be paid attention to when using corn processing equipment. By paying attention to these small details, on the one hand, the failure rate of corn processing equipment can be effectively reduced to keep it in a stable and normal operation state.On the other hand, high quality corn-related products can be processed by reasonable application of corn processing equipment.

Abourt how to make liquid syrup, as a syrup machine manufacturer and supplier, below company will offer the answer:

The liquid syrup manufacturing process as below:

1. Corn starch making process in liquid syrup manufacturing plant:

Use the traditional wet milling method to making corn starch from corn .

2. Mixing process:

The DS value of the corn starch that came from corn starch making process is adjusted to 28-32% and control a proper value of PH and temperature. Or adding a certain amount of water to achieve the above conditions then go to the next section.

3. Liquefaction and heating of liquid syrup manufacturing process:

Starch milk is sent to buffer tank then liquefied by jet cooker with the aid of enzyme.

4.Saccharification process:

The liquefied material keeps reaction for a certain time under the action of enzyme. The required DE value of the glucose will be produced. Then the material is sent to the enzyme killer to kill the enzyme.

5.Filtration and decolorization:

Glucose gets through the filter to remove protein and other impurities in liquid syrup manufacturing process, then at the appropriate temperature passes by active carbon to decoloring, finally send to filters to remove activated carbon and send to the next section.

6 .Evaporation:

The glucose is totally cleaned through safety filter machine then sent to evaporator for concentrating to reach the required DS as final product.

7. Final production storage:

Maintain the glucose syrup purity, easy transportation.

Starch especially the corn starch usually the first choice to as the raw material for liquid syrup manufacturing, by the way, other kinds of starch also a good choice, recently, cassava starch also has been a good choice because of its cheap cost and high quality, you can click production of glucose from cassava to get the related information.